Logo
Home
Main Menu
HOME - MAIN MENU - ADAPTER PLATE PRODUCTS MAIN MENU - ADAPTER PLATE FLOOR BOX MENU - LARGE FLOOR BOX ASSEMBLY INFORMATION

Interchangeability Information for Large Floor Boxes

Large Floor Box Lid and Sides
All Large Floor Boxes start with two sides and a lid.

Large Floor Box Sides A Large Floor Box Bottoms Large Floor Box Sides B
The two Floor Box Ends and the Bottom are
all interchangeable for unlimited configurations.

Building Your Own Floor Box:
If you want to build to build your own box:
1) Add the 2 Sides & Lid to your cart.
2) Shop for the first Floor Box End and add to cart.
3) Shop for the second floor box End and add to cart.
4) Shop for the floor box bottom and add to cart.
5) If you want it assembled add a note in the cart's message box.

NOTE - You can wind up with so many connectors in the box that you may not be able to plug all of the cables in. 8 Speakons in each end and 8 Speakons in the bottom may sound like a great idea until you try plugging cables into all 24 Speakons at the same time... plan ahead!

Changing/Updating an existing Floor Box:
Interchangeability allows you to easily change the ends or bottom if your future needs require.
Without having to purchase an entire new box you'll certainly save time and money!
In most cases you won't even have to remove the box from the floor to change out the parts!

Assembly Information for Large Floor Boxes

NOTE - In our assembly examples below we do not have connectors loaded. You may want to pre-load the connectors in the floor box ends before assembling the box if the loaded connectors will not interfere with the floor installation.

Large Floor Box Parts Laid Out

The 2 Sides, 2 Ends and Bottom laid out

Large Floor Box Side and End Assembly

Start with 1 Side & 1 End
Attach the end to the side with a 4-40 pan head machine screw - do not tighten at this time.

Large Floor Box 2 Sides and 1 end

Attach the other end to the side with a 4-40 pan head machine screw - do not tighten at this time.

Large Floor Box 2 Sides and 2 ends

Attach the second side with a 4-40 pan head machine screws - do not tighten at this time.

Large Floor Box 2 Sides and 2 Ends Tighten

Attach the bottom with qty. 4 4-40 pan head machine screws - do not tighten at this time.
Now that all 8 screws are loosely installed you may tighten all of them as you "square up" the box.

Large Floor Box complete ready for install

With all 8 screws tight the box will be ready to install in the floor.
The countersunk holes noted are for securing the box to the floor using appropriate fasteners for your floor type.

Large Floor Box complete with lid

The last assembly step would be to use 10-32 machine screws to attach the lid.

Floor Boxes Made In The USA
Panels Made In The USA


accepted payments

VADCON, Inc.
PO Box 92414
Rochester, NY 14692
Phone: 800-899-9855
Fax: 888-686-4686

Worldwide Shipping