Logo
Home
Main Menu
HOME - MAIN MENU - MODULAR ADVANTAGE MENU - MODULE PLATES MENU - BNC MODULE PLATE MENU

BNC Module Plate Menu

Common Questions & Answers

1 Which Impedance do I need? - 50 Ohm is generally used for data. 75 Ohm is generally used for video.

2 12G-SDI BNC Plates? - 12G-SDI Bulkheads - a standard for UHD-SDI (4K 2160p).

3 What does Isolated mean? - This type of connector has a non-conductive mounting flange with threaded barrel,  or a non conductive washer added during install. This provides insulation from the panel and other connectors to reduce concerns such as ground loops, etc.

4 Type of Module Plate? - Bulkhead module plates will have BNC on the front and BNC on the rear. Solder Point module plates will have BNC on the front and solder points on the rear.

Description Type of Module Plate Link
BNC Female to BNC Female - 50 Ohm Bulkhead Click Here
BNC Female to BNC Female - 50 Ohm Isolated Bulkhead Click Here
BNC Female to BNC Female - 75 Ohm Bulkhead Click Here
BNC Female to BNC Female - 75 Ohm Isolated Bulkhead Click Here
BNC Female to BNC Female - 12G-SDI - 75 Ohm Isolated Bulkhead Click Here
BNC Female to Solder Points - 50 Ohm Isolated Solder Point Click Here
BNC Female to Solder Points - 75 Ohm Isolated Solder Point Click Here

accepted payments

VADCON, Inc.
PO Box 92414
Rochester, NY 14692
Phone: 800-899-9855
Fax: 888-411-0343

Worldwide Shipping